C−H Activation of Inert Arenes using a Photochemically Activated Guanidinato-Magnesium(I) Compound

UV irradiation of solutions of a guanidinate coordinated dimagnesium(I) compound, [{(Priso)Mg}₂] 3 (Priso=[(DipN)₂CNPrⁱ₂]⁻, Dip=2,6-diisopropylphenyl), in either benzene, toluene, the three isomers of xylene, or mesitylene, leads to facile activation of an aromatic C−H bond of the solvent in all cases, and formation of aryl/hydride bridged magnesium(II) products, [{(Priso)Mg}₂(μ-H)(μ-Ar)] 4 – 9 . In contrast to similar reactions reported for β-diketiminate coordinated counterparts of 3 , these C−H activations proceed with little regioselectivity, though they are considerably faster. Reaction of 3 with an excess of the pyridine, p-NC₅H₄Bu^t (py^But), gave [(Priso)Mg(py^ButH)(py^But)₂] 10 , presumably via reduction of the pyridine to yield a radical intermediate, [(Priso)Mg(py^But⋅)(py^But)₂] 11 , which then abstracts a proton from the reaction solvent or a reactant. DFT calculations suggest two possible pathways to the observed arene C−H activations. One of these involves photochemical cleavage of the Mg−Mg bond of 3 , generating magnesium(I) doublet radicals, (Priso)Mg⋅. These then doubly reduce the arene substrate to give “Birch-like” products, which subsequently rearrange via C−H activation of the arene. Circumstantial evidence for the photochemical generation of transient magnesium radical species includes the fact that irradiation of a cyclohexane solution of 3 leads to an intramolecular aliphatic C−H activation process and formation of an alkyl-bridged magnesium(II) species, [{Mg(μ-Priso^−H)}₂] 12 . Furthermore, irradiation of a 1 : 1 mixture of 3 and the β-diketiminato dimagnesium(I) compound, [{(^DipNacnac)Mg}₂] (^DipNacnac=[HC(MeCNDip)₂]⁻), effects a “scrambling” reaction, and the near quantitative formation of an unsymmetrical dimagnesium(I) compound, [(Priso)Mg−Mg(^DipNacnac)] 13 . Finally, the EPR spectrum (77 K) of a glassed solution of UV irradiated 3 is dominated by a broad featureless signal, indicating the presence of a doublet radical species.     

基于甲基苯丙胺和吗啡的胶体金免疫层析试剂盒检测法的可靠性评价

通过固相萃取-液相色谱-多级质谱(SPE-LC-MS/MS)联用技术和毒品胶体金免疫层析试剂盒检测法对13种中药及调味品样品中甲基苯丙胺及吗啡分别进行定量分析,依据LC-MS/MS检测结果,对毒品胶体金免疫层析试剂盒检测法进行可靠性评价。实验结果表明:型号1试剂盒对甲基苯丙胺和吗啡的特异性均不高,检测准确率分别为57.7%与78.8%;型号2试剂盒对甲基苯丙胺的特异性不足,准确率为73.1%,但对吗啡的检测准确率达到100%。在利用毒品胶体金免疫层析试剂盒进行毒品快速筛查时,应注重排除干扰因素以提高免疫胶体金层析试剂盒的检测准确度。     

用于谷胱甘肽检测的新型罗丹明衍生物荧光探针EI北大核心CSCD

合成了一种反应型近红外荧光探针N-Rh-GSH,该探针以罗丹明衍生物为荧光母体,通过与谷胱甘肽(GSH)作用触发螺环的开关来实现信号的响应,其开环释放的荧光产物具有760 nm的近红外发射波长。细胞实验表明,该探针可实现对活细胞中GSH的成像。     

Pt/NbPWO双功能催化剂的制备及氢解碱木质素制备芳香单体

木质素是一种天然芳香族聚合物,约占木质纤维素的30%,是唯一通过裂解C―O醚键和C―C键生产芳香族化学品或液体燃料的可再生芳香族资源。迄今为止,对木质素氢解制备有价值化合物的研究主要集中在相对不稳定的C―O键的裂解上,这限制了木质素氢解的效率。采用水热法和湿浸渍法制备了多功能Pt/NbPWO催化剂。通过破坏碱木质素中的C―O键和C―C键,可以得到产率为18.02%的芳香族单体。该反应不仅可以断裂木质素聚合物中醚键,同时也可以断裂部分关键的C―C键。其氢解机理可能是丰富的Brønsted酸和Lewis酸位点参与了C―C的活化。此外,重点分析载体和Pt物种在Pt/NbPWO催化剂中的协同作用。     

喹喔啉酮类JNK3抗肿瘤抑制剂的绿色合成——推荐一个综合化学实验

介绍了一个荧光光谱方面新的实验项目:以苝和六苯基噻咯作为发光物质的特征分子,通过测定其不同聚集状态下的荧光光谱,观察聚集荧光淬灭ACQ(aggregation-causedquenching)和聚集诱导发光AIE(aggregationinduced emission)两种不同的发光现象;利用晶体学数据库CCDC (Cambridge Crystallographic Data Centre)检索特征分子的晶体结构,从分子晶体结构层面分析AIE和ACQ发光现象产生的原因,在此基础上探讨不同发光机制和分子状态的关系。论文详细描述了实验的设计思想、实验内容和实验结论,并结合教学过程,分析了该实验在开阔学生视野、提高认知水平及培养科研素养等方面所取得的教学效果。     

基于共价有机骨架材料的磁固相萃取-超高效液相色谱-串联质谱法测定水中4种杀菌剂

杀菌剂在环境中长期富集后会引起土壤和植物病害,并能借助雨水或灌溉渗透到深层土壤和地下水中,威胁水体环境和人体健康。因此针对水中杀菌剂开发简单快速、高效灵敏的分析方法至关重要。该研究通过原位合成法制备了磁性共价有机骨架材料Fe₃O₄@TpBD,将其作为萃取吸附剂,富集环境水体中苯并咪唑杀菌剂(噻菌灵、麦穗宁、多菌灵)和有机硫杀菌剂(稻瘟灵)。利用Fe₃O₄@TpBD与杀菌剂之间的π-π共轭、氢键和静电作用进行吸附,结合超高效液相色谱-串联质谱法(UHPLC-MS/MS)进行检测,建立了测定水中4种痕量杀菌剂的分析方法。通过透射电子显微镜、X射线衍射及傅里叶变换红外光谱等方式对Fe₃O₄@TpBD进行表征,以证明材料的成功合成。对萃取条件进行一系列的优化(Fe₃O₄@TpBD的磁性比例及用量、水样pH、吸附时间、洗脱液的种类及体积、洗脱时间、NaCl含量),确定了最佳萃取条件。4种杀菌剂在3~1200 ng/L的范围内线性关系良好,线性相关系数均大于0.998,方法的检出限和定量限分别为0.06~0.28 ng/L和0.20~0.92 ng/L。在15、150和600 ng/L 3个加标水平下进行加标回收试验,日内和日间精密度分别为2.8%~10.0%和4.4%~15.7%。将该方法用于实际水样的检测,4种杀菌剂的加标回收率为77.1%~119.1%,在水库水中检测出多菌灵,含量为27.5 ng/L。该方法灵敏度高,准确度和精密度良好,操作简单,耗时短。     

基于射频前端的GPS软件接收机设计与验证

介绍了基于硬件射频前端的GPS软件接收机设计与验证。针对GPS串行的搜索算法速度慢的缺点，采用了高速的并行码相位搜索算法；设计和实现了码跟踪环和载波跟踪环，并用载波环路来辅助码跟踪环路；综合考虑接收机的动态性和噪声影响，采用最优化设计思想，设计了GPS软件接收机最优环路带宽。采用GPS中频信号采样器采集实际GPS数据，对搜索和跟踪算法进行了验证。测试结果证明所设计的搜索和跟踪方法是有效的，使得用户在微弱信号处理、多路径处理和发展新的算法等方面具有更大的灵活性，为实际的高性能硬件GPS接收机设计提供的重要的基础。     

氮化钛微粉增强镍磷化学复合镀层的组织及其摩擦磨损性能研究

利用自蔓延高温合成法得到的氮化钛微粉制备了Ｎｉ－Ｐ－ＴｉＮ化学复合镀层，采用Ｘ射线衍射仪，扫描电子显微镜和电子探针分析了镀层的组织和结构，并在球－块摩擦磨损试验机上对镀层的摩擦学特性进行了研究，结果表明，ＴｉＮ微粉可使Ｎｉ－Ｐ化学镀层的组织明显细化，且能提高镀层的最佳时效硬化温度随着Ｎｉ－Ｐ－ＴｉＮ化学复合镀层中ＴｉＮ共析量的增摩擦系数逐渐降低并趋于稳定，耐磨性则存在的一个最佳ＴｉＮ含量；ＴｉＮ微     

Viscosity of Strain Gradient Effects on the Kinetics of Propagating Phase Boundaries in Solids

The theory of thermoelastic materials undergoing solid-solid phase transformations requires constitutive information that governs the evolution of a phase boundary. This is known as a kinetic relation which relates a driving traction to the speed of propagation of a phase boundary. The kinetic relation is prescribed in the theory from the onset. Here, though, a special kinetic relation is derived from an augmented theory that includes viscous, strain gradient and heat conduction effects. Based on a special class of solutions, namely travelling waves, the kinetic relation is inherited from the augmented theory as the viscosity, strain gradient and heat conductivity are removed by a suitable limit process.     

Plastic surface strain mapping of bent sheets by image correlation

A technique using a single CCD camera, a precision rotation/translation stage, a telecentric zoom lens, and digital image correlation software is described for measuring surface profiles and surface plastic strain distributions of a bent thin sheet. The measurement principles, based on both parallel and pinhole perspective projections, are outlined and the relevant mathematical equations for computing the profiles and displacement fields on a curved surface are presented. The typical optical setup as well as the experimental measurement and digital image correlation analysis procedure are described. The maximum errors in the in-plane and out-of-plane coordinates or displacements are about ±5 and ±25 μm, respectively, and the maximum errors in surface strain mapping are about 0.1% or less based on a series of evaluation tests on flat and curved sample surfaces over a physical field of view of 15.2 × 11.4 mm². As an application example, the shape and surface plastic strain distribution example, the shape and surface plastic strain distributions around a bent apex of a flat 2 mm thick automotive aluminum AA5182-O sheet, which underwent a 90° bend with three bend ratios of 2t, 1t, and 0.6t, are determined using the proposed technique.